2006 Quest rear bench

New Topics Forums General Discussion 2004 – 2009 Nissan Quest 2006 Quest rear bench

This topic contains 1 reply, has 2 voices, and was last updated by  dtownfb 4 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1820


    Recently purchased a 2006 Quest. Attempted to fold the rear bench (3rd row) into the floor. The handle under the seat does not release the latches on each side. Is there an easy fix for this or will I need to replace the seat?



    Here are the directions to fold the 3rd row seat into the floor:

    1: remove headrests
    2: push button on back of seat while pulling back on the pull strap. This should rotate the seat back towrd you.
    3: pull the handle under the seat. This should “collapse” the seat.

    If it doesn’t then you may have something blocking the seat or the handle may ghave been disconnected. I’m not sure about the cost but I would check with a body shop first before going to a Nissan dealership, mainly due to cost. The hourly rate at a body shop is much cheaper. The body shop may say they can’t do it.

    Good luck.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.