2007 Nissan Quest code P0021

New Topics Forums General Discussion 2004 – 2009 Nissan Quest 2007 Nissan Quest code P0021

This topic contains 1 reply, has 2 voices, and was last updated by  dtownfb 4 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1659

    donata
    Participant

    Hi recently the check engine soon light turned on in my Quest. I went to mechanic and on the computer came up the code P0021. Anyone had the same code and what to do? Thanks

    #5845

    dtownfb
    Participant

    Here’s the technical service bulletin for P0021:

    APPLIED VEHICLES: All 1996 – 2009 with Variable Valve Timing

    APPLIED ENGINES: VQ35; QR25; QG18; GA16; VQ40; VK56; MR18; MR20

    IF YOU CONFIRM

    The MIL is on with any of the following DTCs stored:
    • P0011, P0014, P0021, P0024, P1110, P1135,

    NOTE: The engine may also have Camshaft Sprocket rattle noise and/or other
    engine noise.

    ACTION
    Do Not replace the variable valve timing Solenoid Valve or the Sprocket(s) without
    performing the complete diagnostics indicated in the EC section of the Service Manual.

    The first steps in the complete diagnostic are to make sure the:
    • Engine oil is at the operating level; add oil if needed. Refer to the Service Manual
    for low oil level diagnoses if needed.
    • Oil pressure is normal when measured with a gauge at the pressure switch port.

    Refer to the Service Manual for low oil pressure diagnoses if needed.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.