2008 Quest brake pedal not returning completely

New Topics Forums General Discussion 2004 – 2009 Nissan Quest 2008 Quest brake pedal not returning completely

This topic contains 1 reply, has 2 voices, and was last updated by  dnalrah 4 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1777

    vandarye
    Member

    My 2008 Quest has developed an intermittent problem. Sometimes the brake pedal does not completely return after letting off of the brakes. When this happens, after letting off of the brake pedal,the brakes stay engaged. I have to hook my foot under the brake pedal and pull it forward about half and inch, then the brakes disengage. This just started the other day and I have not had a chance to pop the hood and check the master cylinder or crawl under the dash and check the tension spring on the pedal. I really doubt it is the spring, otherwise it would always happen, so I am thinking it may be loosing some hydraulic pressure.

    #6093

    dnalrah
    Participant

    Google 2008 Nissan Quest Recalls. You will find that there is a recall on the brake pedal. It sounds like it could cause this exact problem.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.