Power outlets not working after replacing the fuse

New Topics Forums General Discussion 2004 – 2009 Nissan Quest Power outlets not working after replacing the fuse

This topic contains 1 reply, has 2 voices, and was last updated by  dtownfb 8 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #745

    sdmike1
    Member

    All interior 12v power plugs were not working, so I tracked down and replaced a fried 15A fuse in the interior fuse box. I checked the other 15A fuse with a power plug label, and it was fine. However, I still do not have power in these 4 plugs, whether the key is off or on. Any ideas? This is a 2004 SE.

    Oh, I’m sure the new fuse is ok because I “stole” the one for the interior beeper, which was beeping until I pulled it out. 🙂

    Thanks in advance for any ideas.

    Mike

    #3474

    dtownfb
    Participant

    Re-check the fuse to make sure it has not blown again. It’s possible you could have a short that continually blows that fuse.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.