Does anyone know how to get the front bumper off of a 2002 Quest. The driver’s side corner is caved in due to a collision with a “short” post in a parking lot. I suspect that if there was access to the bumper from the inside (or off the car) that the bumper could be popped out into an almost normal state. A few wrinkles in the bumper is better than caved in.
Tried once to remove bumper and gain access to the inside but could not find all the screws holding the bumper in place. Have checked for manuals on 2002 Quest with no luck. I really don’t want to have to go to the dealer with this problem so any information would be appreciated.
You must be logged in to reply to this topic.